Penis Enlargement Pumps: How to Use Fast Results

Pumping is a popular procedure that performs several functions at the same time. On the one hand, maintaining the erectile function and potency, secondly, enlarging the penis with regular use, and thirdly, correcting the shape of the organ. Pumps consist of air and water, the principle of use is slightly different. It is a clinically tested medical device. The doctor decides whether it can be used. The study of the rules of operation of the pump for penis enlargement, the stage of preparation of the device and the organ, the study of the rules of vacuum creation and pumping, pressure reduction.

Study of the operating rules

The use of a pump for penis enlargement is an important issue that affects not only the chance of achieving the desired result, but also safety.

In order not to harm the body, follow the general recommendations:

• do not abuse the frequency, force of pressure;
• do not take vasodilator drugs at the same time;
• refuse to drink alcoholic beverages;
• Regular exercise;
• do not deviate from the suggested instructions.

These rules should not be stipulated, they must be followed from the ground up. The rest of the instructions depend on the device.

Different manufacturers offer their own individual instructions and training programs. Be sure to check them out before you buy to see if it's right for you.

Pneumatic pump

Lubricate the organ to prevent drying and damage to the skin.

Then follow the standard scheme:

• place an erection ring on the flask before pumping air;
• pump out the air;
• bring the organ to an erection, move the ring to its base;
• blocks the outflow of blood by tightly closing the root of the penis with a ring;
• keep to the set training time, then press the valve to reduce the pressure;
• take the organ out of the flask.

water pump

One of the simplest versions of the device, with an excellent operational safety index.For excellent results, follow the sequence below:

• sit in the bathroom, fill it with warm water so that it covers the groin;
• place the organ at rest in the flask;
• start pumping out the air;
• if liquid has accumulated in the flask, drain it by pressing a special valve;
• after achieving a strong erection, attach the ring to the root of the organ, then stop the operations;
• control your exposure so you don't harm yourself.

Start with a few minutes of trial exercises to understand how the first or second type of pump works.

If you feel pain, pain, stop immediately. Make a plan of action in advance - how to prepare the device, the organ, create a vacuum, pump the penis, then apply pressure and finish the procedure.

Preparing the installation pump for work

The penis is one of the most vulnerable and sensitive parts of the male body, as it is made up of soft tissues. It will not be difficult to damage it, so before making your own pump with your own hands, prepare all the parts for later assembly.

Pay attention to the following points:

• the surface of the flask and the seal- there should be no bumps, roughness, cracks or corners;
• manufacturing materials- it is good if it is a hypoallergenic material that does not cause irritation and itching;
• processing of the main mechanisms- wash the flask and close it thoroughly with soapy water or disinfect it with a special solution, dry it and treat it with alcohol;
• device assembly- connect all parts into a single structure so that it can be used as intended.

The vacuum pump is an effective tool for stimulating erection, adjusting and enlarging the penis.

Reckless use that does not comply with the rules leads to injuries and hematomas of the organ. Therefore, follow all the manufacturer's recommendations, safety measures and training systems.

Preparing the penis for training

Use vacuum penis enlargement only after consultation with your doctor. Only a specialist knows the indications and contraindications of such a device.

Before starting the procedure, the organ itself must be prepared. This is important not only to achieve results, but also to protect tissues from tears and vessels from damage.

Preparing the penis for training consists of the following:

• taking a warm bath to dilate the blood vessels and warm the tissues;
• applying ointment to the skin of the penis to increase blood supply;
• place the phallus at the bottom of the pump, press the pump firmly against the scrotum;
• pumping out air from the pump;
• the valve must be closed to create a vacuum;
• open the valve after half a minute after the erection and swelling.

If an erection ring is attached to the device, it should be placed at the bottom of the organ. If it is not there, simply press the flask to the groin.

An excellent option for preparing the penis for pumping is jelqing, a manual technique for stretching the length of the organ.

Creating a vacuum in the flask

Pump models used for vacuum penis enlargement are presented in the form of a flask. To create a vacuum, the air is completely removed from it, creating absolute pressure.

This process is carried out in different ways depending on the type of device:

1. hand pump. After inserting the penis into the flask, squeeze the pear several times, pumping out the air. So you can control the power of the vacuum based on your own feelings.
2. Automatic pump. You don't have to make any effort here. The device works with batteries or batteries. There are buttons and a manometer for control. You only have to select the mode and the intensity.
3. water pump. To create a vacuum, the water must be pumped out by changing the pressure. This model guarantees a uniform effect on the tissues of the body.

Simply put, a vacuum creates the process of pumping out air or water, depending on the type of device used. This should be done gradually, without sudden hasty movements, so as not to cause severe swelling and pain.

The pumping procedure

There are many different ways to use phallus pumping, each man chooses the most suitable training option for him. But the most effective are:

1. Classic pumping. Using a wide flask with an optimal vacuum level. This device inflates the length and thickness of the organ by stretching the corpora cavernosa of the penis.
2. Wrapping. The use of a narrow bulb, which by applying negative pressure does not stretch the width of the penis and directs all the force to the elongation. The effect is achieved much faster than in the previous case.

Weekly training plan:

• first week- do 2 workouts per day for 10 minutes;
• second week- increase the duration of the procedures to 15 minutes, repeated twice a day (if discomfort and pain occur, return to the previous system);
• third week- try long workouts, do a workout for about 20 minutes;
• fourth week- practice 2 workouts, but with different times, 1 workout lasts 10, the second 20 minutes;
• fifth week– he exercises 20 minutes in the morning immediately after waking up and before going to bed, devoting 40 minutes to everything.

If you plan several workouts during the day, take a break of more than an hour between them. Use pumping techniques until the desired result is achieved and then for some time after that to consolidate it.

Pressure reducer

After completing the procedure, very carefully remove the penis from the device by releasing the pressure. To do this, use a special valve or control buttons, if it is an automated model. If you create an area of too low pressure, this is reflected as a side effect - the formation of a hematoma.

After equalizing the pressure in the flask, carefully remove it from the penis. If the design is supplemented with an erection ring, it should be removed immediately or as soon as the erection subsides a little.

If you plan to have sex, put the ring on your penis to maintain an erection for as long as possible, preventing the outflow of blood. Massage the organ with gentle movements to restore blood circulation.

Stopping the device

In order for the device to work as long as possible without side effects and health risks, you need to know not only the operating rules, but also the subsequent care.

Once you're done, always follow these simple steps:

• wash all parts with detergent and warm soapy water before and after training;
• treat the device with liquid antiseptics, especially in places that come into contact with the skin of the genitals;
• make sure all parts are dry, this will protect against fungus and corrosion.

Avoid using the pump and cosmetics containing petroleum jelly at the same time.

Conclusion

A purchased vacuum pump is more reliable than a homemade one, but both options can be effective if used correctly. You can buy the device in a pharmacy, specialty store, or order it online at an affordable price. Experience shows that the vacuum effect really helps to increase the thickness and length of the phallus, if you make the training plan correctly, many reviews on men's forums confirm this. How many centimeters you get closer to your dream depends on the choice of model, the regularity of your training, and compliance with the conditions.